Hollyland LARK 150 Wireless Dual Microphone System

Portable Wireless Dual Mic System
2 x Clip-On Microphones, 1 x Receiver
Fast Auto-Pairing, Charging Case
3.5mm Audio Monitor Output
DSP Noise Cancellation, Anti-Vibration

Add a pair of compact, clip-on wireless microphones for your two-person interview, talk show, documentary production, or vlog with the Hollyland LARK 150 Wireless Dual Microphone System. The LARK 150 system features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your audio recorder, camera, camcorder, or mobile device.

The LARK 150 system is automatically paired, charged, and stored in the included charging case that charges all three units using its USB input port. The transmitters are small and lightweight at less than 1 oz, and they clip onto a lapel or shirt and feature a built-in omnidirectional microphone. They both feature a two-way mute button, built-in clip, and a 3.5mm headphone monitoring output. The receiver features volume buttons, a 3.5mm headphone monitoring output, a 3.5mm line output, and a display that shows the connection and battery status of all three units.

The transmitters feature an anti-vibration design with intelligent noise cancellation and smart frequency selection using FHSS (Frequency Hopping Spread Spectrum) technology for a crisp, clear signal. You can transmit a strong signal with less than 5 ms latency at up to 328' away from the receiver. The system also supports switchable safety, stereo, and mono modes for different configurations.

Key Features:
Anti-vibration sound chamber design
DSP (Digital Signal Processor) intelligent noise cancellation
Built-in high-sensibility omnidirectional silicon microphone on the transmitter
Less than 5 ms latency at 328' distance
Power-On Smart Frequency selection feature
Frequency Hopping Spread Spectrum (FHSS) method
Small and light transmitters weigh less than 1 oz
Charging case that supports fast auto-pairing, upgrade, and storage for the whole system
Mono/Stereo/Safety switchable output modes
Two-way mute buttons on transmitters
Real-time audio monitoring with 3.5mm headphone output on transmitters and receiver
5mm line output on receiver
Wireless Transmission Digital
Included Transmitters 2 x Clip-On
Max Operating Range 328.1' / 100 m (Line of Sight)
Form Factor Beltpack / Portable
Mounting Options Belt Clip (with Included Hardware)
Antenna 1 x 1/4 Wave Wire, Fixed
Number of Audio Channels 2
Audio I/O 2 x 1/8" / 3.5 mm TRS Female Unbalanced Line Output
Audio Output Level 5 dB
USB/Lightning Connectivity 1 x USB Type-C (Charging)
Power Requirements Battery
Form Factor Clip-On
RF Output Power 10 mW
Audio I/O 1 x 1/8" / 3.5 mm TRS Female Output
Pad None
Muting Mute Switch
Signal Processing None
Power Requirements Battery
Battery Type 1 x Built-In Rechargeable
USB/Lightning Connectivity 1 x USB Type-C (Bus Power, Charging)
Dimensions 1.5 x 1.5 x 0.7" / 3.7 x 3.7 x 1.7 cm
Weight 0.7 oz / 21 g
Form Factor Integrated
Colour Black
Sound Field Mono
Capsule Electret Condenser
Polar Pattern Omnidirectional

Sub group Microphones - Wireless
LocationAuckland Branch


$30.00 per day
$90.00 per week
Rent Me
Quantity Required:

Check Availability